CPP is all about connecting the dots and making sure you get to the fun part of building your classic: driving it. It might seem like a small detail, but you always need a way to get the gas from your tank to your LS or other EFI engine. Instead of trying to piece together what you need, CPP made it easy with their complete EFI fuel line kit for LS Swaps. (PN: LSLK-F)
Related Story: Building An LS Swap Air Intake System For Our C10
In this short video, Jason Scudellari gives a rundown of the whole kit for LS swaps or other EFI systems.
What’s so good about CPP’s EFI Fuel Line Kit?
Our fuel injection fuel line kits offers the most complete, highest quality fuel plumbing kit on the market. Kits include 25 feet of high pressure flexible fuel hose in either rubber or stainless braided, a fuel injection filter/regulator, black high pressure push lock fittings, reusable spin-lock feed and return fittings, and the proper pipe thread fittings to fit most aftermarket fuel pump flanges. All our fuel fittings have a reusable spin lock connect end that does not require specialty tools to disassemble.
Included in the Kit
- 3/8″ fuel filter -6AN male feed line fitting
- 5/16″ female fuel filter return line fitting
- (2) 3/8″ female to -6AM male straight filter fitting
- (2) 1/4″ NPT to -6AN make fuel pump adapters
- (6) Straight -6AN female to 3/8″ hose fittings
- (2) 45-degree -6AN female to 3/8″ hose fittings
[…] Related Article: Complete EFI Fuel Line Kit for LS Swaps […]